The old method of determining the amount of paraffine in petroleum was
to carry out the refining process on a small scale; that is, to
distill the residue from the kerosene oils to coking, chill out the
paraffine, press it thoroughly between filter paper, and weigh the
residue. The sources of error in this procedure are manifold; the
principal one is the solubility of paraffine in oils, which depends
upon the character of both the paraffine and the oil, and also upon
the temperature. The next greatest source of error is variation in the
process of distillation and the difference between working on the
small scale and on the large scale.
In most cases, where a paraffine determination is to be carried out,
one has to deal with a mixture of paraffine with liquid oils. Now,
paraffine is not a substance defined by characteristic physical
properties which distinguish it from the liquid portions of petroleum.
It consists of a mixture of homologous hydrocarbons, which form a
solid under ordinary conditions. The hydrocarbons of this mixture show
a gradation in their properties, and gradually approximate to those
which are liquid at ordinary temperatures. It is a well known fact
that a separation of these homologues is entirely impossible by
distillation. It has also been ascertained that the liquid
constituents of petroleum do not always possess boiling points that
are lower than those of the solid constituents.
Pages:
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120